
12X faster
Stick it to your platesto mark your 16″ studs.
For framers · 16″ on center
X-Tape™ · Patent pending
16-inch Stud Layout Tape3″ × 164′ roll
Build faster with more precision.
No more tape measure.
Pick a roll and the applicator that fits it
Prices in Canadian dollars. Free shipping in Canada on orders of $150 or more.
3″ × 164′ roll
$14.991 roll
Soon on Amazon: 16-inch Stud Layout Tape1 7/16″ × 164′ roll
$11.991 roll
Coming soon: 16-inch Layout TapeFor 3″ tape
$19.99Each
Soon on Amazon: Metal Stud Tape ApplicatorFor 3″ tape
$19.99Each
Soon on Amazon: Stud Layout Tape Applicator
Photos and video from real job sites
- A framer lines up a plate on sawhorses, floor trusses behind him
- A framer carries a long plate across the deck under a blue sky
- Drone view of X-Tape running along a plate, every stud marked with an X
- Close-up of an X mark on wet X-Tape, still perfectly readable
- A framer checks his layout under a blue sky
- Drone view of a framer laying out a floor deck with X-Tape
- Hands rolling X-Tape down a plate on sawhorses
- A framer looks down over the floor trusses, roll in hand
- Drone view of a framer marking the top of a foundation wall
- A framer bends over a concrete foundation wall to set a plate
- A framer at the sawhorses, the whole deck and the trees behind him
- Drone view of a framer sitting on a foundation wall, trusses behind him
- X-Tape running along a rim board above a concrete foundation
- Low-angle view up a plate wrapped in X-Tape, a framer in a hard hat behind it
- Drone view of a framer working the top of the foundation wall
- The steel applicator riding a plate, an X every 16 inches, trusses below
- A framer in a white hard hat sitting on the floor deck, smiling
- Drone view of a framer setting a plate on top of a foundation wall
- Two framers carry a long plate across the job site
- X-Tape on a plate against the concrete wall, X mark and centerline in view
- Drone view of the trusses on the foundation, X-Tape on the rim
- Hands rolling X-Tape down a plate with the steel applicator
- Close-up of the roll in hand as the tape goes down the plate
- Drone view over the foundation walls, the crew at work on the deck
- The steel applicator and its roll sitting on a plate, trusses below
- The steel applicator clipped on a plate over the floor trusses
- Drone view of a taped plate on the deck, an X every 16 inches
- A roll of X-Tape clipped to a framer’s tool belt
- Close-up of X-Tape on a joist, in the shade of the trusses
- Drone view of the whole site from above, the house and the pool next door
- A framer sets a plate on sawhorses, trees behind him
- Floor trusses spanning the foundation, X-Tape along the rim
- Drone view of a framer bending over a foundation wall
- A framer lays out a plate, the floor deck below
- The deck from the foundation wall, X-Tape along the rim board
- Drone view of a framer standing on the deck, the house behind him
- Close-up of X-Tape and its dashed centerline on a plate
- Hands feeding X-Tape off the roll along a plate
- Drone view of the corner of the deck, X-Tape along the plate
- A framer sets a long plate on the sawhorses, wide open sky
- The roll and applicator hanging from a tool belt
- Drone view of the trusses over the gravel, the foundation wall beside them
- A framer standing on the foundation wall, house behind
- The steel applicator seen from above, riding the plate over the trusses
- Drone view of the site, a framer laying out the deck between the foundation walls
- A framer sitting on the corner of the foundation wall, the house behind
- A framer in a hard hat works a plate on the deck
- Close-up of an X mark on X-Tape, the shadow of the applicator across it
- The roll of X-Tape sitting on a plate, up close
- Trusses seen from above, X marks lined up on the plate
- The corner of a taped plate sitting on the foundation wall
Six moves the old way, one with X-Tape
The old way
Timed 1 min 5.88 s
Six moves · one redo
- Run your tape measure out along the full length of the plate.
- Make a mark every 16 inches.
- Reel the tape back in, grab a square.
- At each mark, square a line across both plates.
- Then an X on both plates.
- X on the wrong side? Sand it off and start over.
With X-Tape
Timed 5.36 s
Stick the end to the plate and pull. Every stud is already marked.
12X faster.
Printed on every roll
Every 16″, already marked.

- MarksEvery 16″ on center
- Rolls3″ × 164′
- 1 7/16″ × 164′
- WeatherWater resistant
- TapeEasy tear
- high adhesion, low residue
- MaterialBiodegradable
- Precision± 1/8″ over 20′
- Marks
- Every 16″ on center
- Rolls
- 3″ × 164′ · 1 7/16″ × 164′
- Weather
- Water resistant
- Tape
- Easy tear · high adhesion, low residue
- Material
- Biodegradable
- Precision
- ± 1/8″ over 20′
Do not apply on finished surfaces.

On the job
Built for framers.
Straight answers.
What is X-Tape, exactly?
X-Tape marks every stud location before you even pick up a tape measure. Sixteen inches on center, every time, with an X and a dashed line right on the roll.
Pick a question
Something else? Email us
Welcome offer
10% off your first order.
Leave your email and get a code for 10% off any order of 3 items or more.
Buying for a crew or a store?
Tell us what you need. We reply by email with pricing.
Or write to us directly:info@xtapeofficial.com
Bulk order