Skip to content
← All articles

X-Tape, the Blainville Company Behind 16-Inch Stud Layout Tape

Published

X-Tape laid along a sill plate on a concrete foundation, marks every 16 inches
Laid on the sill plate, right on the foundation.

X-Tape is a Blainville, Québec company that makes framing supplies for stud and joist layout. Its core product, the 16-inch Stud Layout Tape, 3″ × 164′ roll (stud layout on wall plates), prints an X and a line every 16 inches on centre so crews mark wall plates and mud sills without a tape measure or pencil.

Who Is X-Tape, the Blainville Company Behind This Tool

X-Tape is based in Blainville, Québec. The company builds products around one idea: stud and joist layout should not need a tape measure, a pencil, and a square every time a plate goes down. The main product sold is the 16-inch Stud Layout Tape (3″ roll), available through the Shopify checkout on xtapeofficial.com for Canadian orders. Crews and building supply stores that want bulk quantities can reach out by email to set up a larger order. Amazon availability is coming soon, but right now the site is the place to buy.

What the 16-Inch Stud Layout Tape Actually Does

The tape comes in a 3″ × 164′ roll. It is printed with an X and a line at every stud location, spaced 16 inches on centre, straight down the whole roll. The precision printed on every roll is ±1/8″ over 20′, which matters when you are lining up plates across a long wall or a run of mud sills.

A few practical details worth knowing before you lay down a roll:

  • It is water resistant, so a bit of job-site moisture will not ruin a roll mid-layout.
  • It tears easily by hand, with high adhesion and low residue, so it comes off clean when you are done marking.
  • It is biodegradable.
  • It should never be applied directly on finished surfaces. It is built for raw framing lumber, not painted or sealed material.

X-Tape is a registered trademark, and the product is patent pending.

Why 16 Inches On Centre Still Matters on the Job Site

Sixteen inches on centre is a layout spacing framers run into constantly, whether it is studs in a wall or joists over a mud sill. That said, no tape or tool replaces the plans. Spacing can change based on the load the wall or floor needs to carry, the sheathing being used, and what the drawings call for on that specific job. The stud layout tape is built for the common 16-inch case, so it speeds up the repetitive part of marking a plate, but the framer still has to confirm spacing against the plans before cutting anything.

How Much Time the Tape Saves on a Wall Plate

X-Tape ran a timed comparison on a single plate: marking it the old way, with a tape measure, pencil, and square, took 1 minute 5.88 seconds. Marking the same plate with the 16-inch Stud Layout Tape took 5.36 seconds. That is one documented comparison on one plate, not a claim about every job site or every crew, but it shows where the time goes when you are not measuring and marking by hand on each stud location.

Applicators and Other Products from X-Tape

Beyond the roll itself, X-Tape sells two applicators to go with it, both plastic:

  • The Stud Layout Tape Applicator, built to run the 3″ roll along a plate.
  • The Metal Stud Tape Applicator, for crews working with metal stud framing.

A 1 7/16-inch tape is in development and listed as coming soon. It is not available to buy yet, so if you need that width today, it is not an option on the site. For anything beyond the standard checkout, including bulk orders for crews or building supply stores, X-Tape handles those requests by email rather than through the online store.

Buying the Tape Online or in Bulk

For a single crew or a one-off job, the roll is bought directly through the Shopify checkout on xtapeofficial.com, shipping within Canada. For building supply stores or larger crews that go through rolls regularly, the better route is a bulk order request by email, where quantity and delivery can be worked out directly. Pricing depends on the order size and what you need, so the best step is to reach out and ask. You can browse the current lineup under tapes or check the blog for more on how the tape gets used on different framing jobs.

Related reading:

Quick questions

  1. YouWhat is X-Tape and where is it made?

    X-TapeX-Tape is a Blainville, Québec company that makes framing supplies, including a stud layout tape used to mark wall plates and mud sills. The product is sold online through xtapeofficial.com with shipping across Canada.

  2. YouWhat does the 16-inch Stud Layout Tape actually mark?

    X-TapeThe 16-inch Stud Layout Tape, 3″ × 164′ roll, prints an X and a line every 16 inches on centre along the whole roll. It is meant for stud layout on wall plates and mud sills, replacing manual measuring and marking for that spacing.

  3. YouCan the tape be used on painted or finished surfaces?

    X-TapeNo. X-Tape is built for raw framing lumber and should not be applied directly to finished surfaces. It is water resistant and tears easily with high adhesion, which works best on bare plates and sills.

  4. YouHow much faster is X-Tape than measuring by hand?

    X-TapeIn a timed comparison shown on the X-Tape site, marking one plate the traditional way with a tape measure, pencil, and square took 1 minute 5.88 seconds, compared to 5.36 seconds using the tape. This was one documented test, not a universal guarantee for every job.

  5. YouHow do building supply stores or crews order X-Tape in bulk?

    X-TapeSingle rolls are bought through the standard Shopify checkout on xtapeofficial.com. For larger quantities, crews and building supply stores can contact X-Tape by email to arrange a bulk order.